Pressure Testing Service
You can book a pressure test for one of our housings at purchase, or you can send us your own test piece for pressure testing. Our pressure vessel is large enough to test almost any camera housing to a depth of 300 m / 985 feet.
You can book a pressure test for one of our housings at purchase, or you can send us your own test piece for pressure testing. Our pressure vessel is large enough to test almost any camera housing to a depth of 300 m / 985 feet.
You can book a pressure test for one of our housings at purchase, or you can send us your own test piece for pressure testing. Our pressure vessel is large enough to test almost any camera housing to a depth of 300 m / 985 feet.
The pressure testing fee covers the following services:
Preparation: 6x pre-test photos and measuring of up to 6x dimensions.
Testing: Up to 3 hours at specified depth.
Post: Drying, 6x post-test photos and measuring of up to 6x dimensions.
Preparation of a test report with time/pressure chart, photos, dimensions and description of visual findings.
Specifications:
Maximum diameter: 320 mm / 12.5 inch
Maximum height: 535 mm / 21 inch
Maximum test pressure: 30 bar / 440 psi
Maximum test depth: 300 m / 985 feet
Please send your test piece prepared for testing (e.g. sealed) or include instructions how to prepare it for testing. If there is something that is delicate or needs extra care, please let us know. If expensive components do not need to be inside the housing for the test, please remove them before sending the test subject.
Failure is an option; that is why we pressure test things. Please let us know what you'd like us to do in case of failure.
Use of pressure facilities is at your own risk. While we handle all equipment entrusted to us with great care, we do not assume any liability for damage to your equipment. We can also not assume liability for loss or damage to your equipment if your equipment fails or leaks during deployment after a successful test in our facility, since we're not in control of deployment procedures.
The Pressure Testing Service does not include a detailed engineering analysis or recommendations for improvements to your equipment. Please get in touch if you would like to discuss this.
Shipping fees to return your equipment to you are charged separately.